Showing posts with label assembly. Show all posts
Showing posts with label assembly. Show all posts

Wednesday, December 10, 2014

Auditory Torture

There has been a lot of talk in the news recently about torture. I, of course, mean the actual news, and not what the Kardashians are up to. That type of “news” is torture of another kind.

What is and isn’t actual torture has been discussed laboriously on the political round table talk shows. Experts, pundits, and news talking heads have beaten this subject to death - or at least into submission. They all seem to fail to see the irony; listening to them talk about torture that much is actually torture. It can almost make you care what the Kardashians might be up to.

The media seems very concerned about the physical side of “enhanced interrogations.” Perhaps someone was made to stand and stay awake for a really long time. Maybe someone didn’t get too much to eat. Someone was naked in front of other people? It all sounds a lot like college to me, but what do I know? No one has invited me to sit down at the round table and discuss any of this yet, but if they do, I will tell them everything they want to know about torture and national security.

I have very real, very recent first-hand experience with torture. Not physical torture, mind you, although I am over forty, so activities like going up stairs and getting out of bed are getting mighty close to feeling like “enhanced techniques.” No, I have experience with mental torture – specifically, auditory torture.

I have been to hundreds of classrooms to read my books, but yesterday I did my first all-school author assembly in the multi-purpose room. I have not spent any significant amount of time in a multi-purpose room since I graduated from the sixth grade, but yesterday I found myself needing to hang around inside one for about an hour or so before I started the assembly.

I didn’t last long.

The kids were all in class, so my time in the multi-purpose room started out with peace and quiet, but eventually shuffling of feet and voices could be heard behind a closed curtain up on the stage. Then, all of a sudden, the formerly tranquil cafeteria/basketball court was filled with the sounds of wounded and dying animals. Zebras brayed and seals barked. Hyenas huffed and cackled. Tiny elephants gave their last, dying, gurgling trumpet.

Or was that an actual trumpet? Oh my Lord, it was! It’s band practice!

The unseen, murderous musicians warmed up behind the big curtain for what seemed like five hours, but my watch, my cell phone, and the wall clock all conspired to lie and tell me it only lasted two minutes. Then I heard a teacher’s voice.

Oh my God, there is an adult stuck back there with them!? She’s so close to the noise! She will obviously die soon.

She mentioned something about Jingle Bells, and then the awful sounds began again. At times, it almost sounded like the students were all trying to play the same song, but no CSI team of forensic scientists in the world would have been able to piece together Jingle Bells out of the musical wreckage that ensued. It sounded as if someone had lined up a whole truckload of tubas, clarinets, trombones, and trumpets and then ran them all over with the truck.

I could not hear myself think. I could not feel myself breathe. I did not want to live any longer in that room. I blacked out momentarily and when I came to I was outside in the fresh air and sunlight. Apparently my brain’s fight-or-flight response had kicked in and my legs had carried my unconscious body to safety. I stayed away until it was almost time to start the assembly, and when I went back in, the killing of music had ceased, but I could still hear the same teacher talking to the students. Holy cow, she has been up there, stuck behind the curtain, enduring this for almost an hour! She must be bulletproof.

That thought reminded me of another time in my life when I was subjected to cruel and unusual punishment. I was walking in the park one day last summer, and the ice cream truck was paralleling me on the neighborhood streets near the greenbelt. I was mercilessly pelted with The Entertainer for a solid ten minutes. I was off in the weeds looking for two sharp sticks that I could jam into my ears when, thankfully, he moved on and the horrendous noise pecking at my brain finally stopped. How the man who drives that infernal music box on wheels can function well enough to even fit the key into the ignition is beyond my comprehension.

Now, if you want information from someone, I guess you can make them stand for a long time, or make them skip some meals, or strip them naked and attempt to humiliate them. It might work, and it will definitely get you on the news. But if you really want good intel – I mean if you want them to beg to hand over every last scrap of useful information they have – there is only one way to go. Just sit them down in a nice comfortable room and pipe in elementary school band practice or the ice cream man’s tinny music box version of The Entertainer on infinite loop.

For fast, effective results, that kind of auditory torture can’t be beat. On the flip side, we should immediately entrust all of our nation’s top secrets to the elementary school band teacher and the ice cream man. They will never crack.

Until then, I guess we’ll have to flip the channel over to the Kardashians or continue to endure the irony of the media beating torture to death. No matter what, we need to avoid the multi-purpose room during band practice.

You know, come to think of it, the real irony here is that “Auditory Torture” would be a good name for a rock band.

See you soon,

-Smidge


Copyright © 2014 Marc Schmatjen


Check out The Smidge Page on Facebook. We like you, now like us back!

Also visit Marc’s Amazon.com Author Page  for all his books. Enjoy!

Wednesday, December 1, 2010

Assembly Required

My oldest son, Number One, recently celebrated his sixth birthday, and received a transforming robot “kit” from his grandparents. On the outside of the exciting multi-colored box it showed the robot, standing proud and looking for adventure, and it displayed the two other “modes” that he could turn into, namely an airplane and a scorpion. It was solar powered and motorized to move on its own. The outside of the box looked like any 6-year-old’s dream. The inside of the box was another matter entirely.

We knew there was “assembly required,” because one of the fun features of the toy was that you got to “build it yourself.” I was excited about having a father-son activity where he could gain experience building something mechanical. He tore open the box and spread the contents out and on the table. I took one look at the inventory, and in as calm a voice as I could muster, asked him to put his hands on his head and slowly back away from the toy. The plan had changed. The largest thing in the box, by a wide margin, was the instruction manual. That’s never a good sign.

There were three plastic bags containing screws so small you could lose them all at once with a good sneeze. There were tiny plastic gears, a half-inch in diameter, with little drive shafts, no thicker than a paper clip. There was a one-inch-square solar panel connected to the smallest motor I have ever seen. The motor was no more than 3/8 of an inch long and less than ¼ inch round. It was tethered to the solar panel with two four-inch-long wires roughly the thickness of human hairs.

There were two rafts of plastic parts, containing roughly 80 parts each, all still attached to their spider web of molded plastic anchor points. Some of the parts were so small I was really not sure where I needed to cut to get them free. “Is that a part that I need, or is that the piece I’m supposed to cut off? I can’t tell!”

I was flabbergasted by how complicated and technical this child’s toy was, so I took another look at the box. It advertized that the toy was for ages 10 to adult, with the added caveat that no child under 4 was to get within a 50-foot radius of any of the small parts. I agreed wholeheartedly with the lower age limit, but not because I was worried about a choking incident. There was no part of the entire assembly large enough to choke a child. An infant could have swallowed the motor whole, no problem. I figured the warning was simply to give you a fighting chance of ending up with all the pieces you needed to make it work. To that end, it should really have read “no child under 18.”

I took serious issue with the 10 and up rating, however. I am 38 years old, I have an engineering degree, and I have been designing and assembling mechanical apparatuses professionally for over 20 years, and I had grave reservations about my ability to complete the task. I contend that there is no 10-year-old on this planet with the patience, forethought, dexterity, motor skills, mechanical knowledge, or even the proper tools to assemble one of these things.

There would be no father-son activity today. Involving a 6-year-old in this project would have been like asking Mike Tyson to tune your Stradivarius violin. Wrong guy for the job. I locked the door to the room and went to work.

Step 1 had me pressing the pinion gear onto the motor shaft. The gear was half the size of a pencil eraser, and the motor’s shaft was the diameter of a gnat’s eyelash. It was a “press fit” so the gear wouldn’t slip on the shaft, and I had to push it down as hard as my fingers could press to get it on, without accidentally bending the miniscule shaft. Ten-year-olds were disqualified on the first step.

In steps 12 through 18 I threaded two of the tiniest wires I have ever seen through an obstacle course of plastic needle-holes, snapping the assembly together as I went, making sure not to sever either of the wires accidentally by pinching them or looking at them the wrong way.

In step 35 I assembled a quadruple-reduction, eight-gear transmission inside a shrouded plastic housing. It was the plastic robot equivalent of the ship in a bottle, only the ship was the size of your fingernail, and the bottle wasn’t see-through.

In step 114 I had to go to the garage and find my straight shaft #0 Phillips head screwdriver in my specialty tool kit. Do you have a straight shaft #0 Phillips head screwdriver? No? Well, you would have been dead in the water at step 114.

In step 254 I assembled a double offset cam and linkage system that would have made Leonardo da Vinci weep with joy.

In step 316 I wept. Not with joy.

In step 496 I split an atom.

In step 513 I snapped together the last piece, and marveled at how small it was.

The entire robot, tip to toe was only 3-1/2 inches tall. It took me 1-1/2 hours to assemble it. That’s almost a half-hour per inch.

I unlocked the door and went out to display my accomplishment with pride.

“What took you so long?” was the only response from my wife.

I went back in and re-locked the door until I calmed down.

When I had regained my composure, I came back out and handed Number One his new toy. He and his middle brother, Number Two, went outside to set it in the sun, and cheered as they watched it walk down the sidewalk. Then they brought it inside and tore one of its legs off while calmly discussing who should be allowed to play with it next. It lasted 7-1/2 minutes.

Maybe we don’t need that leg for airplane mode…

This was quite a “toy.” I was just barely old enough to assemble it, and my boys were at least a decade too young to play with it. I think the box should really read, “Must be a 45-year-old aerospace engineer to assemble, and must be at least 35 to operate.”

I’ll give it one thing, though. At least it didn’t require any batteries.

See you soon,
-Smidge


Copyright © 2010 Marc Schmatjen


Have kids? Have grandkids? Need a great gift?
Go to www.smidgebooks.com today and get your copy of “My Giraffe Makes Me Laugh,” Marc’s exciting new children’s book. Get ready for a wild rhyming adventure!

Wednesday, March 17, 2010

Insert Son A into House B

This weekend, my family had an impromptu picnic in our backyard to celebrate the return of the sun. As we lazed about on our blanket, my wife and I surveyed the hurricane debris-like spread of balls, Tonka trucks, scooters, bikes, baseball bats, mitts, and assorted plastic gardening equipment taking up approximately 90% of the back patio surface not already claimed by actual patio fixtures like tables and my giant manly stainless steel BBQ. We both decided it was time for some better outdoor storage for the boy’s toys, so off to our local home improvement warehouse we went.

We scored a sweet clearance deal on two 130-gallon storage chests that are approximately 2-1/2 feet wide by 2-1/2 feet tall and 5 feet long. They have a nice flat lid, that when closed, becomes a handy bench seat. That is no less than 62 cubic feet of clean, dry, weatherproof storage that should leave us plenty of room to acquire the inevitable 45 more cubic feet of toys in the coming years.

We tied those bad boys to the top of the Ford Expedition, and drove home triumphantly to begin the “easy assembly process.”

When I cracked open the first of the two cardboard boxes, I found just what I was expecting. Six heavy-duty plastic sides, two metal hinge assemblies (complete with gas spring-assist shocks), one long metal reinforcing bar for the lid, and the assorted corner brackets and hardware to fasten everything together. Piece of cake.

The good folks at Suncast Outdoor Storage Products were also kind enough to include three copies of the owner’s manual. One in English, and two in languages that I don’t understand. I went with the English version.

One thing that separates me from many of the other males of the species is that I always read the instructions before I try to put anything together. It saves time, and money. It also saves me from having to explain to the boys why some words are “adult words” that they’re not allowed to use.

Almost immediately I became skeptical of the instructions when I read on the first page, “Only adults should set up the product. Do not allow children in the setup area until assembly is complete.”

I thought to myself, “Uh-oh. The lawyers have gotten to them. There is no single part to this chest that weighs over 7 pounds. How could a kid possibly get hurt during assembly? Besides, how will my boys learn anything if I don’t at least let them watch?”

Then I lost all respect for the engineers at Suncast when I read, “Two adults required for this step” on the instructions of how to slide the 2-pound side panel into its slots in the front and back panels. There is no way that I could need another adult to help me with this step. My kids could probably do it by themselves.

Even though I was totally disgusted with the manual, I read to the end and then began the installation. I wasn’t even half way through before I started to change my opinion of the guys that wrote the manual.

With my three young boys playing all around me on the back patio, I went to work. I had the base and all four sides on the chest in a matter of minutes. Just as I had suspected, the “need two adults” step took me about 5 seconds by myself. Ha! What were those manual writers thinking?

Almost as soon as I got the last side wall into position, the new toy chest began getting filled with toys. Balls, baseball bats, and plastic trucks were hurled at me from all directions, ricocheting around the inside of the chest and flying at my head. Progress was halted for a few minutes as I explained to the boys that they needed to wait until Daddy was done installing the lid before we could fill the chest.

The lid hinges were to be fastened to the side walls with screws. I had never given much thought to the individual parts list and count that you always find in manuals, detailing exactly how many #5-type screws you should have received. I always figured there was no sense spending time counting them. Either I had them or I didn’t, and if I was short a screw or two, I would figure it out.

Well, I went to grab the eight #2-type screws I would need to fasten the hinges to the chest, and only two were sitting in the spot where I had left them on the patio table. One was on the ground under the table, and my two-year-old son was sitting Indian style a few feet away with three in his lap and one sticking out of his mouth. Two on the table, one on the ground, three from his lap and the one I just wrenched out of his mouth makes seven. I was supposed to have eight. Did he swallow one?!? Or did I even have eight to begin with? I never counted them!!

As I picked him up to inspect him for a perforated esophagus, the last #2 screw fell out of his pant cuff. Whew! That must be why they tell you how many you’re supposed to have. Mental note to self: Always count them ahead of time to avoid unnecessary trips to the ER for exploratory hardware X-rays.

OK, crisis averted, and on to lid attachment. After I had retrieved the four #6-type screws from their new storage location on the ledge high above the sliding glass door, and out of reach of all two-year-olds, I was ready to fasten the long reinforcing bar into place. Now, where did that long reinforcing bar go? It was lying on the patio right in front of the new storage chest a minute ago. A yellow plastic Wiffle Ball bat has taken its place, but no reinforcing bar in sight.

After a lengthy interrogation of the four-year-old and the five-year-old, I was led to the fort that they had made with the cardboard lid of the shipping box. My 5-foot-long reinforcing bar was stuck 2 feet into the mud, helping to support the fort’s roof. I had to give them points for ingenuity and structural integrity, but I was not amused.

After cleaning off the bar on one of their shirts, I went back to work on the chest. While I was away dismantling the fort, the two-year-old had managed to put away a few more toys into the new chest. The reinforcing bar attaches to the inside of the lid, so I needed to step into the chest to do the work. No problem. I just scooted the soccer ball and Tonka truck out of the way with my foot, and stepped in. Thirty seconds later, the reinforcing bar was attached and the first of two new storage chests was completely assembled.

I stood up straight, stretched my back and swung my right leg out of the chest. Just before the weight transfer was complete I realized that I was about to step on the two-year-old, who had taken up a prone position in front of the new chest. I quickly and awkwardly adjusted the landing zone for my right foot, narrowly missing my youngest son, but planting my foot squarely on the yellow plastic Wiffle Ball bat.

I’m not 100% sure what really happened next, but after some mid-air acrobatics, the end result was three young boys laughing hysterically, and me flat on my back inside my brand new Suncast Outdoor Storage Products 130-gallon storage chest with a soccer ball in my left kidney and my head resting rather uncomfortably on a Tonka truck.

As I lay there gazing up at the late afternoon sky, slipping in and out of consciousness, it occurred to me that the guys who wrote the instruction manual were some of the smartest men on the planet. They weren’t lawyer-shy wimps or limp-wristed computer jockeys like I had first assumed. They were dads.

They advised me not to let the kids into the assembly area, and I didn’t listen. Then they tried once more to keep me safe by suggesting that the project could not be completed without a second adult. It was my short-sighted machismo that kept me from seeing that warning for what it was. The second guy isn’t there to help you with the assembly. He’s there to keep a lookout for stray hardware and toys if you happened to ignore their first suggestion about no kids. He’s also the guy that drives you to the hospital when you step on the Wiffle Ball bat.

See you soon,
-Smidge


Copyright © 2010 Marc Schmatjen


Have kids? Have grandkids? Need a great gift?
Go to www.smidgebooks.com today and get your copy of “My Giraffe Makes Me Laugh,” Marc’s exciting new children’s book. Get ready for a wild rhyming adventure!